Der Artikel wurde auf die Merkliste gesetzt.
Übersicht This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Eigenschaften - No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Spezifikationen - Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 103.0mm × 78.5mm
- Display size: 84.8mm × 63.6mm
- Dot pitch: 0.212 × 0.212
- Resolution: 400 × 300
- Display color: black, white
- Grey level: 2
- Full refresh time: 4s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface SYMBOL | DESCRIPTION |
VCC | 3.3V |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output, low active |
Lieferumfang - 4.2inch e-Paper Module
- PH2.0 20cm 8Pin
Dokumentation / Downloads
Mit dieser Funktion können Sie einen individuellen Preis bei uns anfragen.
Wenn Sie einen Zielpreis haben, geben Sie diesen bitte ein. Andernfalls
belassen Sie das Feld auf 9999,99€.
Sie müssen eingeloggt sein, um eine Preisanfrage stellen zu können.